Orion System Lead Controller - Manual (Page 52)

Index
Lead/Lag Controller Technical Guide 52
Lag Relay..............22
Lag Relay for Lead/Lag Control..............22
Lead/Lag Alarms Window..............36
Lead/Lag Controller
Accessing..............10
Address..............8
Address Switch Settings..............7
Dimensions..............5
Mounting..............5
Naming..............10
Navigation..............11
, 12
Power Supply..............5
Renaming..............10
Wiring Diagram..............6
Lead/Lag Controller Status Screen..............11 , 12
Lead/Lag Controller Status Screen Toolbar..............11 , 12
Lead/Lag Enables..............31
Lead/Lag Example..............41
Lead Lag Operation..............3
Lead/Lag Proof Setpoint Help..............20
, 21
Lead/Lag Relay Confi guration Screen..............20
Lead/Lag Relays..............19
Confi guring..............20
Lead/Lag Relays Window..............19
Lead/Lag Status Screen..............11
Lead Relay..............22
LEDs..............9
License..............9
Logic..............30
Logic, Setpoint, and Deadband..............30
M
Main Control Method..............20 , 21
Main Control Method Window..............22
MIN..............15
Mounting..............5
N
N/C Contact (Open for Active)..............18
Network Operation..............7
No Alarms Button..............36
N/O Contact (Close for Active)..............18
Number of Readings to Average..............15
O
OE217-02..............14
OE217-03..............14
OE256-05..............14
OE256-07..............14
Operating System..............9
Outdoor Air..............30
Outdoor Air Enable..............29
Outdoor Air Enable Setpoints..............29
Outdoor Air Enable Window..............29
Outdoor Status..............31
Output Voltage Limits..............29
Override..............18
Analog Output..............30
Analog Outputs..............30
Binary Input..............18
Schedule..............35
Override Binary..............18
Override Reading
, Analog Inputs..............16
Override Relay..............23
Override Sensor..............30
P
PID Control..............27
PID Derivative Filter..............27
PPM..............15
Printer Selection..............39
Printer Selection Dialog Box..............39
Printing
Status Reports..............39
Prism 2 Main Screen..............10
Prism 2 Software..............9
Prism 2
System Requirements..............9
Prism 2 Technical Guide..............9
Proof Failure Timeout Delay..............23
, 24
Proof Input..............22
Proof Inputs..............17
Proof Setpoint..............23
Proportional Control Window..............27
PSI..............15
R
Read Global Analog Channel..............14
Read Global Binary..............18
Readings to Average..............15
Relay Confi guration Screen..............20
, 21
Relay Output Type..............20 , 21 , 23
Relay Override..............23
Relays..............19
Confi guring..............20 , 21
Control Source Field..............22 , 23
Naming..............19
Renaming..............19
Relays Window..............19
Renaming Analog Outputs..............25
Renaming Relays..............19
Reset Factory Defaults..............37
Reset Lead/Lag Button..............36
Reset Limits..............28
Restoring Schedules..............34
L-R