Orion System Lead Controller - Manual (Page 31)

Lead/Lag Controller Technical Guide
Section 8: Outdoor Status & Lead/Lag Enable
31
Outdoor Status
The Outdoor Status Window is located in the center of the Lead/Lag
Controller Status Screens (Figure 8-9, pages 11-12) and displays
the Outdoor Air (OA) Temperature. See Figure 56. In order for the
Outdoor Air Temperature to display, you must have another controller
set up to broadcast the Outdoor Air Temperature.
Outdoor Status and Lead/Lag Enables Windows
Lead/Lag Enables for Lead/Lag
The Lead/Lag Enables Window is located in the center of the Lead/
Lag Controller Status Screen (Figure 8, page 11). See Figure 57.
Each Group corresponds to a schedule. So Group #1 corresponds
to Schedule #1, Group #2 corresponds to Schedule #2, and so on.
The lightbulb lights up when the Schedule is activated in the Relay
Confi guration Window (Figure 34, page 23).
Figure 57: Lead/Lag Enables Window
Lead/Lag Enables for 2 Lead/1 Lag
The Lead Lag Enables Window is located in the center of the 2 Lead/1
Lag Controller Status Screen (Figure 9, page 12). See Figure 58.
Group #1 corresponds to Schedule #1. The lightbulb lights up when
Schedule #1 is activated in the Relay Confi guration Window (Figure
34, page 23).
Figure 58: 2 Lead/1 Lag Enables Window
Figure 56: Outdoor Status Window