Orion System Lead Controller - Manual (Page 38)

Section 11: Saving and Restoring Setpoints
Lead/Lag Controller Technical Guide 38
Restore From File
Restoring / Copying Lead/Lag
Setpoints
Once you save the Lead/Lag setpoints to a fi le on your computer,
you can restore or copy the setpoints to another controller.
From the top toolbar of the Lead/Lag Controller Status Screen, click
<Setpoints> and then click <Restore From File> . See Figure 74.
Figure 74: Setpoints Menu - Restore From File
In the File Open Window (Figure 75), click on the desired fi le from
the list of folders and click
<Open> .
Figure 75: File Open Window