Orion System Lead Controller - Manual (Page 26)

Section 7: Confi guring Analog Outputs
Lead/Lag Controller Technical Guide 26
Confi guring Analog Outputs
Left-click in the data entry fi eld in the Analog Outputs Window
(Figure 37, page 25) to open the Analog Output Confi guration
Window (Figure 39).
Figure 39: Analog Output Confi guration Window
Analog Output Confi guration Window
Figure 40: Control Type Field
Control Type Field
The following are the control options available (Figure 40):
● Not Confi gured
● Direct Acting Floating Point
● Reverse Acting Floating Point
● Direct Acting PID
● Reverse Acting PID