Orion System VCM - Manual (Page 3)

Operator Interfaces 3
Technical Guide
Modular System Manager
ENTER
CLEAR ESC
PREV NEXT
DOWN
UP
6 5 4
DEC
7
0
8
1 3 2
9
MINUS
-
STATUS
SETPOINTS
SCHEDULES
ALARMS
OVERRIDES
9.00"
6.25"
1.81"
Figure 2: Modular System Manager Dimensions
Description
The OE392-05 Modular System Manager provides a direct link to en-
able the system operator to view the status and to adjust the setpoints of
any controller on the control system communications loop. The Modu-
lar System Manager is designed to be used with the Orion Control Sys-
tem. The System Manager is housed in an attractive off-white colored
plastic enclosure. The System Manager is equipped with a four line by
20 character backlighted display panel and a 24 key membrane keypad
for data selection and entry. All keypad operations are simple and straight
forward, utilizing non-cryptic plain English language messages. Menu
driven programming allows for easy setup and operation without the
need for specialized training. The System Manager also has 2 integral
LED’s for user notification of system alarm conditions and override
initiations. Protection from unauthorized users is provided by the Sys-
tem Manager’s integral multi-level passcode authorization programming.
On a Networked Orion System the Modular System Manager is con-
nected to the communications and power loop of the system via modu-
lar cables that simply plug into the System Manager board and the Power/
Comm Distribution Board. This virtually eliminates wiring errors and
makes installation fast and easy. When it is to be connected to a Stand
Alone system, a cable with modular connectors on one end and stripped
wire ends on the other end is provided to facilitate connecting commu-
nications and power to the Modular System Manager from the 24 VAC
power source and the HVAC unit controller communication wiring ter-
minals.
The Modular System Manager is designed for wall mounting. Mount-
ing holes are provided to attach the Modular System Manager to a stan-
dard handy box. It is recommended that the System Manager be mounted
at approximately eye level to allow for ease of programming and read-
ing of the display. The System Manager is typically mounted in the
building manager or superintendent’s office or in an equipment room.
The attractive enclosure is quite suitable for mounting in any location
or with most decors.
Introduction
Modular Service Tool
Mode
Selection
ENTER
CLEAR ESC
PREV NEXT
DOWN
UP
6 5 4
DEC
7
0
8
1 3 2
9
MINUS
-
STATUS
SETPOINTS
SCHEDULES
CONFIGURATION
ALARMS
ON
OVERRIDES
BALANCE - TEST
10.00”
4.75”
2.02"
1.63"
Figure 1: Modular Service Tool Dimensions
Description
The OE391-05 Modular Service Tool is a system operator interface
that provides a direct link to enable the system operator to view the
status, configure and to adjust the setpoints of any controller on the
control system communications loop. The Modular Service Tool is
housed in an attractive beige colored plastic enclosure. The display
area is covered with a clear plastic bezel for protection of the display
screen. The Modular Service Tool has a four line by 20 character dis-
play panel with adjustable contrast control and a 27 key membrane
keypad for data selection and entry. All keypad operations are simple
and straight forward, utilizing non-cryptic plain English language mes-
sages. Menu driven programming allows for easy setup and operation
without the need for specialized training. The OE391-05 Modular Ser-
vice Tool is supplied with (4) AA 1.5 V Volt alkaline batteries, a wall
mount DC power supply and a communication cable terminated with
an 8 pin DIN connecter for connection to the Service Tool. The cable
allows the user to setup and program any Orion controller with a 8 pin
DIN connector socket by simply plugging in the service tool to the
socket on the controller.
The Modular Service Tool is designed to be carried by the system in-
staller or service technician. Its rugged plastic housing, provides supe-
rior protection for the electronic components housed inside. The OE391-
05 Modular Service Tool is a top quality service tool that will stand up
to the demands of the typical job site environment for many years.