Orion System VCM - Manual (Page 40)

Technical Guide
Operator Interfaces 40
Status Screen 16-22
VCM v1.00 ID 59
Fan Relay: OFF
Cool Stage 1: OFF
Heat Stage 1: OFF
Line 2 - Current Supply Fan Relay status
The letters FRC will appear before the colon if this Relay is
in a Force Mode. On screens 16 to 21 this line will indicate
the relays use and the ON/OFF condition for that relay.
Possible options are:
Cooling Stage Pre-Heater
Heating Stage Alarm
Warm-up Mode Override
Reversing Valve Occupied
Reheat Economizer
Exhaust Fan Not Used
Line 3 - Current relay status and description of what it is
configured for.
The letters FRC will indicate the relay is forced to its
current condition.
Line 3 - Current relay status and description of what it is
configured for.
The letters FRC will indicate the relay is forced to its
current condition.
Status Screen 23
VCM v1.00 ID 59
NO ALARMS
Line 2 Blank
Line 3 Alarm Conditions. Can Be One Of The Following:
NO SUPPLY AIR TEMP
NO OUTDOOR AIR TEMP
SPACE SENSOR FAILURE
MECH COOLING FAILURE
MECH HEATING FAILURE
FAN PROVING ALARM
DIRTY FILTER ALARM
SMOKE ALARM
LO SUPPLY AIR ALARM
HI SUPPLY AIR ALARM
LOW CONTROL TEMP
HIGH CONTROL TEMP
If you press "Enter" the screen will scroll through all the active alarms.
Programming The VCM Controller