Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 107)

Printer Configuration
AS56 and AS56 Plus User Manual 6-29
Printer Configuration
To configure the auxiliary NMS/Printer port with a printer, use the unit’s
control panel to enter (
SELECT ) the Utilities menu. Use the UP/DOWN
arrows to locate NMS/Prt Port and then SELECT again. If necessary, use
the UP/DOWN arrows to locate Mode.
Repeatedly SELECT until the mode indicates Printer.
Use the UP or DOWN arrow to display Speed and then SELECT to choose
the desired printer data rate. Finally, END twice to return to the Main
Menu.
The printer should be configured for the same data rate as the unit’s
printer port and 8-N-1 character coding. All data is output with both a CR
and an LF at the end of each line. Printer “word wrap” is unnecessary and
the printer should not add an LF to each received CR.