Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 27)

Configuration Parameters
AS56 and AS56 Plus User Manual 3-3
Configuration Parameter
Proper configuration of the Access Syst em56 requires information
regarding the network itself and the manner in which the network will be
used. Most of this information is readily available from the network
supplier although some user decisions must be made from within the
limitations of the network.
This manual includes a configuration worksheet at the end of this chapter
to aid the user in configuring the unit. Verilink recommends that the
master worksheet be photocopied and that copies be used to record the
actual information for Access Sy stem56 units. By using the information
in this chapter, one worksheet should be completed for each unit in the
network. After completing all worksheets for all units, this chapter should
again be used to actually configure the units.
Note that the Access Sys tem56 can remain unpowered indefinitely
without losing the configuration parameters.
Plug in the Access Sy stem56 and confirm that the LCD panel displays:
If necessary, press the UP or DOWN arrow buttons until the panel displays
the above information.
The item numbers in this section correlate to the circled reference
numbers on the AS56 and AS56
Plus
Worksheet, on page 3-30. To make
your life easier, photocopy the worksheet and complete it as a record of
each unit’s configuration.
1. Model number Administration information indicating specific
Access Syst em56 model being configured.
2. Company name and location. Administrative information
determined by customer.
3. DDS Carrier or T-Carrier ID, Local Circuit ID, and Billing
Number Administrative information obtained from the network
supplier.
Main Menu HH:MM
_Configuration
TIP