Verilink AS56/56Plus (896-502588-001) Product Manual - Manual (Page 26)

Configuring and Installing the Access Syste m56
3-2 AS56 and AS56 Plus User Manual
Requirements
Listed below are the requirements for operating Access Syste m56 units.
Software and
hardware Each Access Sys tem56 product is a self-contained unit that can be
configured with no additional software or hardware.
This chapter describes the steps necessary to configure, test, and install
Access Syst em56 using the front panel buttons and LCD panel. The same
steps can be more easily performed using a customer-supplied external
terminal (or PC with terminal emulation software). See Chapte r6,
Auxiliary Ports .
Power and
environmental Access Syst em56 uses 110-120 VAC, 60 Hz, at 0.25 amps.
Access Syst em56 does not require a conditioned environment but should
be operated in areas with adequate ventilation.