Verilink AS56/56Plus (896-502588-001) Product Manual User Manual
Page 28
Configuring and Installing the Access Syste m56
3-4
AS56 and AS56
Plus
User Manual
Steps 4 through 11 (below) apply to T1/FT1 network interface
configuration while Steps 12 through 15 apply to 56/64 kbps DDS
network interface configuration.
4.
NI Framing. This information must be obtained from the network
supplier. Depress
SELECT
to choose between D4 and ESF.
5.
NI Line Code. This information must be obtained from the network
supplier. Depress
SELECT
to choose between AMI and B8ZS.
6.
NI LBO (Line Build Out). Should be set to 0 dB unless the network
supplier specifically requests otherwise. If requested, repeatedly
SELECT
to choose 0, 7.5, 15, or 22 dB.
NOTE
Configuration
_NI Interface
SELECT
to
display:
NI Configuration
Framing:_XX
SELECT
to
display:
NI Configuration
Line Code:_XXX
DOWN
to
display:
NI Configuration
LBO..:_X dB
DOWN
to
display: