Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 74)

DIDCSU E1 Version
4-2 Verilink DIDCSU 2912 User Manual
Terminal
Parameters
Set your terminal, or terminal program, to:
• 19.2 kbit/s
• 8 data bits
• no parity
• one stop bit
• no flow control
Logging On Press E NTER . The pSH+> prompt is displayed. Type “craft” and press
E NTER .
A password prompt appears. Initially there is no password, press
E
NTER to display the NCM Main Menu.
If the NCM Main Menu display ( Figure 4-1) does not show the
DIDCSU in the proper shelf/slot position, use the procedure
outlined in the section on
"Bus Compatibility", in Chapter 2 of this
manual.
Figure 4-1 NCM Main Menu
In the screen displayed:
-- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 --
Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2
Managing at NEAR end node [0.0.0.204] Node ID: 204
Managing at NEAR end node [0.0.0.204] Node ID: 204 Managing at NEAR end node [0.0.0.204] Node ID: 204 Managing at NEAR end node [0.0.0.204] Node ID: 204
<- SLOT -> <- SLOT -> <- SLOT -> <- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -
0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - -
1 D [*N] A
1 D [*N] A 1 D [*N] A 1 D [*N] A
2 - - - - - - - - - - - - -
2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -
3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -
4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - -
KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm
KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm
H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm
H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm
P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu
P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu
V=vcu W= dhdm_poet X=qpri ?=unknown
V=vcu W= dhdm_poet X=qpri ?=unknown V=vcu W= dhdm_poet X=qpri ?=unknown V=vcu W= dhdm_poet X=qpri ?=unknown
S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration
C) configuration D) diagnostics
C) configuration D) diagnostics C) configuration D) diagnostics C) configuration D) diagnostics
P) performance/status A) alarm
P) performance/status A) alarm P) performance/status A) alarm P) performance/status A) alarm
B) circuit manager I) manufacturing info
B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 >