Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 83)

DIDCSU E1 Version
Verilink DIDCSU 2912 User Manual 4-11
If you enable Receive clock from shelf, the Timing Options Menu
changes:
Figure 4-7 Timing Options Menu —Receive Clock from Shelf
Table 4-6 provides a brief description of the additional timing
parameters shown when the Receive clock from shelf timing
option is set to Y:
Table 4-6 Configuration Menu (Timing Options)—Receive Clock from Shelf, Additional Parameters
When finished configuring the timing options, type “X” to return to
the E1 Port Configuration Menu (
Figure 4-5 ).
Type “X” again to return to the Configuration Menu ( Figure 4-4 ).
TA Tertiary Auto Restore: Select Yes to resynchronize to the next higher
clock source automatically if a previously failed clock source becomes
available again. Specifying a secondary source for clocking is useful if
the primary source fails. Restoring from a tertiary source may take up to
60 seconds.
Yes or No
(Y/N)
X Exit the Timing Options screen.
Command Description Options
-- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)-- -- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)-- -- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)-- -- DIDCSU 2912 CONFIGURATION MENU (TIMING OPTIONS)--
Current shelf timing source: Card 2, INTERNAL (PRIMARY) Current shelf timing source: Card 2, INTERNAL (PRIMARY) Current shelf timing source: Card 2, INTERNAL (PRIMARY) Current shelf timing source: Card 2, INTERNAL (PRIMARY)
Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore
PRIMARY PC) 2 PS) INTERNAL PA) YES PRIMARY PC) 2 PS) INTERNAL PA) YES PRIMARY PC) 2 PS) INTERNAL PA) YES PRIMARY PC) 2 PS) INTERNAL PA) YES
SECONDARY SC) 2 SS) NET 2 SA) YES SECONDARY SC) 2 SS) NET 2 SA) YES SECONDARY SC) 2 SS) NET 2 SA) YES SECONDARY SC) 2 SS) NET 2 SA) YES
TERTIARY TC) 2 TS) NET 1 TA) YES TERTIARY TC) 2 TS) NET 1 TA) YES TERTIARY TC) 2 TS) NET 1 TA) YES TERTIARY TC) 2 TS) NET 1 TA) YES
R) Receive clock from shelf: YES R) Receive clock from shelf: YES R) Receive clock from shelf: YES R) Receive clock from shelf: YES
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
Command Description Options
PC Primary Module Slot Number: This option selects the module
providing the primary timing source.
Enter module (slot)
number
SC Secondary Module Slot Number: This option selects the module
providing the secondary timing source.
Enter module (slot)
number
TC Tertiary Module Slot Number: This option selects the module
providing the tertiary timing source.
Enter module (slot)
number
X Exit the Timing Options screen and return to the Configuration
Menu.