H3C Technologies H3C Intelligent Management Center User Manual
Page 113
Advertising
103
You only need to deploy DVPN settings because VAM clients exchange VAM packets to establish DVPN
tunnels. DVPN settings include VAM server settings for the VAM server, VAM client settings for the hub
and spokes, and tunnel, routing, and IPsec settings for all VAM clients. If client authentication is needed,
deploy AAA authentication settings to the VAM server.
To deploy DVPN settings:
11.
Click the Service tab.
12.
From the navigation tree, select IPsec VPN Manager > IPsec Resources > VPN Domains.
13.
Click a VPN domain name to enter the VPN domain page.
14.
Select IPsec devices.
15.
Click Operation and select Deploy to Device.
IVM starts to deploy DVPN settings.
16.
Click Back.
Advertising