H3C Technologies H3C Intelligent Management Center - Manual (Page 213)

203
2. From the navigation tree, select IPsec VPN Manager > IPsec Resources > VPN Domains.
The VPN Domain List displays all VPN domains.
3. Click the name of the DVPN domain.
The configuration page of the DVPN domain appears. The page contains two tabs: Device
Information and Tunnel Connectivity Audit. By default, the Device Information tab is displayed.
4. Click the Tunnel Connectivity Audit tab.
The Tunnel List displays all tunnels that are audited by IVM. By default, IVM only audits hub-spoke
and hub-hub tunnels.
5. Click the View Session Information icon for the tunnel whose session information you want to
clear. IVM obtains the DVPN session information from both tunnel ends and displays the session
information in the DVPN Session List.
6. Click Reset Sessions.
A confirmation dialog box appears.
7. Click OK.