H3C Technologies H3C Intelligent Management Center - Manual (Page 157)

147
{
End Time—Set the statistics collection end time. Click the field to select the time in the calendar
that appears. The valid format is YYYY-MM-DD hh:mm.
3. Click OK.
The IPsec tunnel transmit rate report appears.
Figure 46 IPsec tunnel transmit rate report
Parameter description:
{
Statistical Range—IPsec tunnels involved in the report.
{
From/To—Statistics collection start time and end time of the report.
{
Tunnel Name—IPsec tunnel name.
{
Local Subnet—Local end of the IPsec tunnel.
{
Remote Subnet—Remote end of the IPsec tunnel.
{
Transmit Rate—Transmitted data size per second of the IPsec tunnel.
{
Bar graph—Each bar graph shows the statistics for an IPsec tunnel.
IPsec tunnel receive rate report
IPsec VPN, GRE over IPsec VPN, and DVPN are established based on IPsec tunnels. IVM can collect
statistics for the data receive rate of these IPsec tunnels.
To view the IPsec tunnel receive rate report:
1. Click the Report tab.
2. In the My Real Time Reports area, click the IPsec tunnel receive rate report link.
The parameter setting page appears.
{
Statistical Range—Select the tunnels of which you want to collect statistics. Options include All
tunnels and VPN domain names created in IVM. If you select All tunnels, the report involves the
tunnels in the network domains, as well as the tunnels not configured through IVM.
{
Begin Time—Set the statistics collection start time. Click the field to select the time in the
calendar that appears. The valid format is YYYY-MM-DD hh:mm.
{
End Time—Set the statistics collection end time. Click the field to select the time in the calendar
that appears. The valid format is YYYY-MM-DD hh:mm.