Datum setting – HEIDENHAIN ND 920 User Manual
Page 15
Advertising
15
Datum Setting
PROBE X
X
Select the X axis (if not already selected).
PROBE X
Move the edge finder towards the workpiece
edge until the LED in the edge finder lights up.
The position of the edge is now displayed.
POS.MEASURED X =
Retract the edge finder from the workpiece.
POS.MEASURED X =
5
2
Set the position value (for example 52) to this
edge.
SPEC
FCT
Leave the probing functions, or select a new axis.
ENT
Advertising