HEIDENHAIN PWM 20 - Manual (Page 134)

November 2014 Software description 135
Display of encoder parameters
8 Select the function "Encoder parameter display".
The most important characteristics of the encoder are displayed.
The characteristics are grouped in
 Encoder information
 Logistic information
 Functional safety
Further information
You can scroll through the display groups.
Encoder information
Display of the most important properties of the connected encoder; this is an example of a linear
encoder.
The parameter p30 contains the information on the encoder that is also output to the control
monitor. Therefore, it has been included here too.
If an EnDat22/DRIVE-CLiQ converter is connected, the parameter p30 contains information on
this converter (e.g. EIB 2391S) and is displayed in this table.
Note
The values for "Signal periods per revolution" and "Grid division" represent the parameter
settings in DRIVE-CLiQ which are not necessarily identical with the physical properties of
the encoder.