HEIDENHAIN PWM 20 - Manual (Page 80)

November 2014 Software description 81
Save encoder
configuration
in encoder 8 With the button "Save encoder configuration in encoder" an encoder configuration stored in
the computer is transferred to the encoder where it is saved in selected memory areas.
8 After clicking this button you can select the memory area to be transferred in the
"Selection of memory area" window.
8 Click the "Transfer" button to write the "new" data to the selected memory areas.
Attention
Data already saved in the encoder will be overwritten! We recommend that you back up the
"old" encoder configuration. (See section “Save encoder configuration to a file” on page 79.)