HEIDENHAIN PWM 20 - Manual (Page 4)

November 2014 General information 5
1 General information
1.1 How to Use this Manual
About this
manual This manual refers to the ATS Adjusting and Testing Software Version 3.0.xx,
ID 539862-23.
The ATS software is executable on the following hardware:
 PWM 20 ID 731626-01 and
 PC expansion board IK 215 ID 386249-xx
Update service This service manual is regularly updated.
The current (printable) version is available on the Internet in PDF format: www.heidenhain.de
Explanation of
the symbols Symbols represent the type of information.
Other
documentation For more information please refer to the following documentation:
 HEIDENHAIN User's Manual Cable and Connection Technology
 Documentation of the machine tool builder
 Interfaces of HEIDENHAIN encoders
 Mounting instructions of the encoders
 Encoder brochures (www.heidenhain.de)
Target group The activities described in this manual may only be performed by specialists for service,
maintenance and commissioning who have profound knowledge of electronics, electrical
engineering and NC machine-tool technology.
Screen
displays
Note
Printed copies are only distributed to the participants of our service training courses and are
enclosed with new test units.
Note
E.g., reference to more detailed information in another chapter.
Attention
E.g., indication of error messages that may be displayed or repetition of program steps.
DANGER
E.g., information that incorrect operation may cause the danger of electrical shock or lead to
the destruction of components.
Note
Keep these instructions for later reference!
Note
The screenshots and displays in these instructions depend on the encoder type connected
and on the product key. Thus, they may differ from your testing situation.
The images only serve as examples!