HEIDENHAIN PWM 20 User Manual
Page 181
Advertising
![background image](/files/816920/content/doc181.png)
184
HEIDENHAIN ATS Software User's Manual
RI position:
The position of the reference pulse is good; the bar is within the green range, close to the center
(+ sign in the illustration).
RI zero crossover:
The zero crossovers of the reference pulse are good; the bars are in the green range (* sign in
the illustration).
Note
The illustrations are examples. Shapes and sizes may be different in practice.
If the measurements are older than 15 seconds, the display becomes "translucent".
For signal definitions, refer to the brochure "Interfaces of HEIDENHAIN Encoders"
ID 1078628-xx or to the chapter "Interface description" in this manual.
Advertising