SMA SI 4548-US - Manual (Page 224)

20 Troubleshooting SMA America, LLC
224 SI4548-6048-US-BE-en-20 Operating Manual
In emergency charge mode, process values are shown in the display. Parameters cannot be changed
during the charging process. If the Sunny Island is restarted, the settings that were saved before the
ECM are loaded.
Bridge between AC1 and AC2
After emergency charge mode has been completed make sure to remove the bridge between
AC1 and AC2!
Restarting
Observe information for restarting and wait for 15 minutes (see Section 9.5 "Recommissioning
After Automatic Shutdown", page 76).