SMA SI 4548-US - Manual (Page 3)

SMA America, LLC Legal Provisions
Operating Manual SI4548-6048-US-BE-en-20 3
Legal Provisions
Copyright © 2015 SMA America, LLC. All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form
or by any means, be it electronic, mechanical, photographic, magnetic or otherwise, without the prior
written permission of SMA America, LLC.
SMA America, LLC doesn‘t make representations, express or implied, with respect to this
documentation or any of the equipment and/or software it may describe, including (with no limitation)
any implied warranties of utility, merchantability, or fitness for any particular purpose. All such
warranties are expressly disclaimed. Neither SMA America, LLC nor its distributors or dealers shall
be liable for any indirect, incidental, or consequential damages under any circumstances.
(The exclusion of implied warranties may not apply in all cases under some statutes, and thus the
above exclusion may not apply.)
Specifications are subject to change without notice. Every attempt has been made to make this
document complete, accurate and up-to-date. Readers are cautioned, however, that
SMA America, LLC reserves the right to make changes without notice and shall not be responsible for
any damages, including indirect, incidental or consequential damages, caused by reliance on the
material presented, including, but not limited to, omissions, typographical errors, arithmetical errors or
listing errors in the content material.
All trademarks are recognized even if these are not marked separately. Missing designations do not
mean that a product or brand is not a registered trademark.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by SMA America, LLC and SMA Solar Technology Canada Inc. is under
license.
Modbus
®
is a registered trademark of Schneider Electric and is licensed by the Modbus
Organization, Inc.
Phillips
®
and Pozidriv
®
are registered trademarks of Phillips Screw Company.
Torx
®
is a registered trademark of Acument Global Technologies, Inc.
SMA America, LLC
3801 N. Havana Street
Denver, CO 80239 U.S.A.