Yaskawa JAPMC-CM2304-E - Manual (Page 15)

1.2 EtherNet/IP Features
1-3
1
EtherNet/IP
Communication
1.2 EtherNet/IP Features
EtherNet/IP is a standard network configured with standard worldwide protocols (Ethernet, TCP/IP, and CIP), it has the
following features since it uses standard protocols.
• Can manage and integrate entire production systems, from field devices to the internet.
• Can control, set, diagnose the device and collect data on the same Ethernet.
• Can use a previously installed Ethernet for the information system.
The following figure illustrates how a system that connects EtherNet/IP devices and DeviceNet using EtherNet/IP may
be arrayed.
Fig. 1.3 Example of EtherNet/IP (Includes DeviceNet) System Configuration
EtherNet/IP
DeviceNet
Distributed I/O
Controller Controller
Robot I/O Device
I/O Device Drive Drive Display unit Sensor
Controller
for welding
PC
Recipe information:
Controller information: Recipe.xxx
Welding.xxx
FTP
MAC ID:
IP:
Mask: 00:00:xx:xx:xx:xx
192.xxx.xxx.xxx
255.255.0.0
DHCP
CIP router
Standard Ethernet protocol
(FTP, DHCP, etc.)
Device control/setting by EtherNet/IP
Routing between
EtherNet/IP
and DeviceNet
Distributed I/O