Yaskawa JAPMC-CM2304-E - Manual (Page 37)

3.3 Setting the Communication Manager
3.3.1 Preparation of the Personal Computer
3-9
3
Mounting and Starting the Module
3.
Check that the Automatically detect settings check box is cleared, and click the OK button to close
the dialog box.
4. For a computer running Windows 2000, click the Windows Start button and select Settings - Control
Panel - Network and Dial-up Connections.
For a computer running Windows XP, click the Windows Start button and select Settings - Control
Panel - Network Connections.
On a computer running Windows 2000, the Network and Dial-up Connections window will be displayed. On a
computer running Windows XP, the Network Connections window will be displayed.
5.
On a computer running Windows 2000, double-click the Local Area Connection icon.
On a computer running Windows XP, click Local Area Connection and click Change settings of this
connection in the Network Tasks menu.
Windows 2000 Windows XP
The Local Area Connection Properties dialog box will be displayed.
6. Select Internet Protocol (TCP/IP) and click the Properties button.
The Internet Protocol (TCP/IP) Properties dialog box will be displayed.