Yaskawa JAPMC-CM2304-E - Manual (Page 41)

3.3 Setting the Communication Manager
3.3.2 Setting the Communication Manager
3-13
3
Mounting and Starting the Module
4.
Click the OK button in the Logical Port Setting dialog box. The display will return to the Communica-
tion Manager window. Confirm that Ethernet (LP) is allocated to the selected Logical Port number.
5.
Save the settings and restart the Communication Manager.
Refer to 3.3.2 ( 4 ) Saving the Communication Port Settings and Restarting the Communication Manager on
page 3-13 for the procedure.
( 4 ) Saving the Communication Port Settings and Restarting the Communication Manager
Save the communication port settings, and restart the Communication Manager to validate the settings.
1. Select File - Save. A save confirmation message will be displayed. Click the Yes button to save the
communication port settings.
These settings will be used as the communication port information whenever the Communication Manager is
started.
2.
Close the Communication Manager window and restart to validate the settings.
Select File - Exit to close the Communication Manager window. A confirmation message will be dis-
played. Click the Yes button to close the Communication Manager window.
3.
Double-click the Communication Manager icon in the YE_Applications folder to reopen the Com-
munication Manager window.
Double-click