Yaskawa JAPMC-CM2304-E User Manual
Page 77
5.3 Displaying a Register List and Notes at Register Input
5.3.1 Displaying a Register List
5-15
5
Explicit Message and Explicit Message Send Function
( 2 ) MPE720 Ver 5.xx
Use the following procedure to display the MPE720 Ver 5.xx register list.
1.
Select File
− Open − Tool − Register List from the MPE720 Ver 5.xx Main Menu of Engineering
Manager window to open the Register List window.
Refer to 4.1.1 Displaying the Module Configuration Window on page 4-2
for details on how to display the Engi-
neering Manager window.
2.
Enter the leading register number “MWxxxxx” (or “DWxxxxx”) to be accessed in the Register No. input
field, enter the final register number to be accessed in the D input field, and click anywhere in the list.
The contents of the specified range of register numbers will be displayed.
Clicking the DEC button will display the list in decimal values. Clicking the HEX button will display the list in
hexadecimal values.
( 3 ) Displaying a Register List with the Quick Reference (MPE720 Ver 5.xx)
Register lists can also be accessed with the Quick Reference.
1.
Select View
− Quick Reference from the Main Menu of MPE720 Engineering Manager window.
The Quick Reference will be displayed at the bottom of the Engineering Manager window.
Refer to 4.1.1 Displaying the Module Configuration Window on page 4-2
for details on how to display the Engi-
neering Manager window.
2.
Click the Register List tab to switch to the register list.