Devicenet operation led states, Verify that the drive is on the network, Normal operation led states – Yaskawa CM013 V7 DeviceNet Option User Manual
Page 13: Verify that the drive is on the network -8
Installation 1-8
DeviceNet Operation LED States
The operational states of the V7 DeviceNet Option LEDs after the DeviceNet diagnostic LED sequence has been completed is described
below. Please wait at least 10 seconds for the loading process to complete before verifying the states of the LEDs.
Verify that the Drive is on the Network
Normal Operation LED States
The table below describes the V7 DeviceNet Option Card LED states under normal operation. The V7 DeviceNet Option Card has been
properly connected to the DeviceNet network, configured on that network and is properly part of the scan list. The network is currently
operational.
Table 1.4 – DeviceNet Option LED States
LED
State
Indicates
MOD
Off
No Power
On Green
Device Operational
Flash Green
Device in Standby
Flash Red
Minor Fault
On Red
Unrecoverable Fault
Flash Red-Green
Device Self-Test
NET
Off
Not Powered/Not Online
Flash Green
Online/Not Connected
On Green
Link OK/Online and Connected
Flash Red
Connection Timeout
On Red
Critical Link Failure
Flash Red & Green
Communication Faulted
Table 1.5 – Normal Operation LED States
LED
State
Indicates
MOD
On Green
Device Operational
NET
On Green
Link OK/Online and Connected