Yaskawa DeviceNet Option Card CM059 - Manual (Page 4)

4
Introduction
This manual explains the specifications and handling of the Yaskawa DeviceNet™ CM059 (SI-N1) option.
The Option connects the drive to a DeviceNet™ network and facilitates the exchange of data.
Option Compatibility
The CM059 (SI-N1) option is compatible with these Yaskawa drive products:
Terminology
CM059 (SI-N1):
The CM059 option is also known as the SI-N1 option. They are one in the same.
Option:
Throughout this manual the term “option” will be used when referring to the CM059 (SI-N1) Option.
Inverter, drive, AC drive:
In this document, the word “inverter”, “ac drive” and “drive” may be used interchangeably.
Related Documents
To ensure proper operation of this product, read and understand this manual. For details on installation and operation of the
drive, refer to the appropriate drive Technical Manual. For details on specific parameters, refer to the appropriate drive
MODBUS technical manual. All technical manuals and support files can be found on the CD that came with the drive and are
available for download at www.yaskawa.com .
For information on DeviceNet™ contact the Open DeviceNet™ Vendor Association at www.odva.org .
GPD515/G5 Technical Manual document reference TM 4515
F7 document reference TM.F7.01 (F7 User Manual) or TM.F7.02 (F7 Programming Manual)
G7 document reference TM.G7.01 (G7 User Manual)
CIMR-ACA* document reference TOEPC71063600 (Instruction Manual)
GPD515/G5 MODBUS Technical Manual document reference TM 4025
F7 MODBUS Technical Manual document reference TM.F7.11
GPD is a trademark of Yaskawa, Inc.
MODBUS
®
is a registered trademark of Schneider Automation, Inc
.
DeviceNet™ is a registered trademark of the Open DeviceNet™ Vendor Association.
RSNetWorx™ is a registered trademark of Rockwell Automation.
All trademarks are the property of their respective owners.
Table 1: Compatible Yaskawa Drive Products for the CM059 (SI-N1) Option
Product
Series
Models
(Drive Nameplate)
Notes
GPD/515/G5 CIMR-G5■ —
F7 CIMR-F7■ —
G7 CIMR-G7■ —
ACA CIMR-ACA■
1. The CM059 (SI-N1) option firmware must be version 2.4 or later for operation with
the ACA product series.
Refer to the firmware lable on the CM059 (SI-N1) option to identify the
firmware. Contact Yaskawa to obtain an updated CM059 (SI-N1) option if required.
2. The ACA product will appear the the same as the G7 product series when viewed
on the network.