TA Triumph-Adler LP 4024 - Manual (Page 138)

Using the Operator Panel
1-123
Printer Resetting
The procedure described below resets the printer's temporary conditions,
such as the current unit of measurement, page orientation, font, character
code set, margins, etc., set by commands to their default values.
1
Press the MENU key.
2
Press the or key repeatedly until Others > appears.
3
Press the > key.
4
Press the or key repeatedly until >Printer Reset appears.
5
Press the ENTER key. A question mark (?) appears.
If you want to abandon the printer resetting procedure, press the
CANCEL
key
6
Press the ENTER key again. Self test appears while the printer is
resetting itself, then Please wait followed by Ready.
>Printer Reset
MENU
Others >
?
>Printer Reset
ENTER >Printer Reset ?
ENTER
Self test
Please wait
>Ready