TA Triumph-Adler LP 4024 - Manual (Page 158)

Cleaning
2-10
2.3.2 Cleaning the Charger Grid
The charger grid is a part located at the bottom of the charger unit, which
also needs to be cleaned. You should use a grid cleaner attaching it to the
printer and pull out the charger unit as instructed below.
1
Take the grid cleaner from protective bag in the new toner kit, and
remove the cap.
The grid cleaner pad is supplied with water soaked. Perform the
following procedure before the pad dries.
2
Attach the grid cleaner to the printer with the pad at the top, as
shown in the figure.
Protective Bag
Cap
Grid Cleaner
Note
Grid Cleaner