TA Triumph-Adler LP 4024 - Manual (Page 39)

Using the Operator Panel
1-24
Proof and Hold
When printing multiple copies, this mode first prints one copy so that you
can check it before continuing to print the remaining copies. Since you can
check the printouts before printing the remaining copies, the waste of
paper can be reduced.
Make the Proof and Hold settings using the printer driver and print. The
printer prints one copy and, at the same time, saves the print job to the
Microdrive. Use the operator panel to print the remaining copies.
You can also change the number of copies when resuming printing using
the operator panel.
Printing Remaining Copies of a Proof and Hold
Use the same procedure as that for Quick Copy. See Quick Copy on page
1-21 .