TA Triumph-Adler LP 4024 - Manual (Page 89)

Using the Operator Panel
1-74
Resolution
You can set the default print resolution in four ways — 300 dpi, 600 dpi,
Fast 1200 mode, and Fine 1200 mode. The clarity of printed characters
and graphics becomes sharper in this order. Fine 1200 mode renders
optimum print quality but requires more printer memory and increase the
time it takes up to print a job.
1
Press the MENU key.
2
Press the or key repeatedly until Print Quality > appears.
3
Press the > key.
4
Press the or key repeatedly until >Resolution appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Select Fast 1200 mode, Fine 1200 mode, 300 dpi or 600 dpi
using the or key.
If you want to abandon the setting procedure, press the CANCEL
key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
>Resolution
MENU
Print Quality >
?
>Resolution
Fast 1200 mode
ENTER
>Resolution
? Fast 1200 mode
ENTER
MENU