TA Triumph-Adler LP 4024 - Manual (Page 33)

Using the Operator Panel
1-18
e-MPS Printing
To use the e-MPS system, an option Microdrive must be installed in the
printer.
What is e-MPS?
‘e-MPS’ is an abbreviation for ‘enhanced-Multiple Printing System,’ which
is a post-processing function that combines electronic sorting, job
retention, virtual mailboxing, and a barcode printing system for job
retrieval.
When printing multiple copies of a document, the data is transferred from
the computer to the printer only for the first copy; the data is then stored
on the printerís hard disk. Copies of the document are printed using the
stored data.
Printing is performed faster with less computer spooling time and less
network traffic.
Furthermore, printed data that is stored on the Microdrive can be called up
using job retention functions, such as Quick Copy etc., allowing you to
quickly print additional copies of a document from the printer at any time,
without needing to re-spool the document or start up the computer system.
Job Retention
Job Retention is part of the e-MPS system, allowing you to save print jobs
to the option Microdrive and retrieve them out as desired in one of four
different modes.
When printing, select a Job Retention mode using the printer driver. The
following four modes are available:
• Quick Copy
• Proof and Hold
• Private Print
• Job Storage
For details, refer to the Printer Driver Guide .
Option
e-MPS >