TA Triumph-Adler LP 4024 - Manual (Page 166)

Print Quality Problems
3-5
Dirt on the top edge or back of the paper Check the paper chute and the ramp.
Pull out the paper feed unit and check for toner on the
paper ramp. Clean the paper ramp using a soft, dry, lint-
free cloth. See 2.3 Cleaning on page 2-9 .
Check the transfer roller.
If the transfer roller is dirty with toner, try printing
several pages.
Characters out of position. Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE 2e command error. If the problem occurs
only with a specific file or program, the most likely cause
is an error in a parameter to a command or command
syntax.
Printed Results Corrective Action