TA Triumph-Adler LP 4024 - Manual (Page 73)

Using the Operator Panel
1-58
Setting the Character Pitch for Courier/Letter Gothic
You can set the character pitch for fixed fonts when the default font is
Courier or Letter Gothic.
1
Press the MENU key.
2
Press the or key repeatedly until Font > appears.
3
Check that Internal is displayed and press the > key.
4
Press the or key repeatedly until >Pitch appears.
5
Press the ENTER key. A blinking cursor ( _ ) appears.
6
Press the or key to increase or decrease the value of the figure
where the cursor is blinking. The character pitch can be set between
0.44 and 99.99 characters per inch, in 0.01 character-per-inch
increments. You can use the > or < keys to move the cursor right and
left.
If you want to abandon the setting procedure, press the CANCEL
key.
7
When the desired size is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
>Pitch
MENU
Font >
Internal
?
>Pitch
10.00 cpi
ENTER
>Pitch
10.00 cpi
ENTER
MENU