ProSoft Technology MVI56E-MNETR - Manual (Page 27)

Start Here MVI56E-MNETR ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module with Reduced Data Block
ProSoft Technology, Inc.
Page 27 of 153
August 31, 2009
1.11.1 Create the Remote Network
1 Right-click I/O C ONFIGURATION and choose N EW M ODULE …
2 Expand the C OMMUNICATIONS module selections and then select the Ethernet
Bridge module that matches your hardware. This example uses a 1756-
ENBT/A module.
Note: If you are prompted to "Select Major Revision", choose the lower of the available revision
numbers.