Configuring the mvi56e-mnetr module, Using prosoft configuration builder software, Set up the project – ProSoft Technology MVI56E-MNETR User Manual
Page 49: 2configuring the mvi56e-mnetr module
Configuring the MVI56E-MNETR Module
MVI56E-MNETR ♦ ControlLogix Platform
User Manual
Modbus TCP/IP Interface Module with Reduced Data Block
ProSoft Technology, Inc.
Page 49 of 153
August 31, 2009
2
Configuring the MVI56E-MNETR Module
In This Chapter
Using ProSoft Configuration Builder Software....................................... 49
Download the Project to the Module...................................................... 67
to Connect to the Module ....................................... 68
2.1
Using ProSoft Configuration Builder Software
ProSoft Configuration Builder (PCB) provides a quick and easy way to manage
module configuration files customized to meet your application needs. PCB is not
only a powerful solution for new configuration files, but also allows you to import
information from previously installed (known working) configurations to new
projects.
Note: The MVI56E-MNETR module receives its protocol and backplane configuration information
from the Personality Module (Compact Flash). Use ProSoft Configuration Builder to configure
module settings, and to download changes to the Personality Module.
2.1.1 Set Up the Project
To begin, start P
RO
S
OFT
C
ONFIGURATION
B
UILDER
(PCB).