Starting the data analyzer – ProSoft Technology MVI56E-MNETR User Manual
Page 94
MVI56E-MNETR ♦ ControlLogix Platform
Diagnostics and Troubleshooting
Modbus TCP/IP Interface Module with Reduced Data Block
User Manual
Page 94 of 153
ProSoft Technology, Inc.
August 31, 2009
4.8.2 Starting the Data Analyzer
The following illustration shows an example of the Data Analyzer output.
The Data Analyzer can display the following special characters.
Character Definition
[ ]
Data enclosed in these characters represent data received on the port.
< >
Data enclosed in these characters represent data transmitted on the port.
<R+>
These characters are inserted when the RTS line is driven high on the port.
<R->
These characters are inserted when the RTS line is dropped low on the port.
<CS>
These characters are displayed when the CTS line is recognized high.
_TT_
These characters are displayed when the "Time Tick" is set to any value other than
"No Ticks".