Wireless flash shooting, Flashes that support fel lock – Sony Alpha 9 User Manual

Page 136

Advertising
background image

ILCE-9
4-692-676-11 (2)

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08

GB

136

Flashes that support FEL lock

• HVL-F60M, HVL-F43M and HVL-F32M can be used as clip-ons,

off-camera connected by a cable, and for wireless flash shooting
(controller/remote).

• HVL-F20M can be used as a clip-on, off-camera connected with a cable,

and for wireless flash shooting (controller).

Hint

• By setting [FEL Lock hold], you can hold the setting while the button is

pressed down. Also, by setting [FEL Lock/AEL hold] and [FEL Lock/AEL tggle.],
you can shoot images with the AE locked in the following situations.

– When [Flash Mode] is set to [Flash Off] or [Autoflash].

– When the flash cannot go off.

– When using an external flash that is set to manual flash mode.

Note

• The FEL lock cannot be set when a flash is not attached.

• If a flash that does not support the FEL lock is attached, an error message is

displayed.

• When both AE and FEL lock are fixed, lights up.

Wireless flash shooting

There are two ways to use the wireless flash. One way uses a light signal
and the other uses a radio signal to communicate with the flash. The flash
attached to the camera must be the controller in light signal flash shooting
and a Wireless Radio Commander (sold separately) is required for radio
signal wireless flash shooting. For details on how to set each method, refer
to the instruction manual of the flash or the Wireless Radio Commander.

1

Remove the shoe cap from the camera, and then attach the
flash or the Wireless Radio Commander.

• In light signal wireless flash shooting, set the attached flash as the

controller.

2

MENU

 (Camera Settings 1)

[Flash Mode]

[Wireless].

Advertising