Self-timer, Select (self-timer) by turning the drive mode dial, Adjust the focus and shoot the image – Sony Alpha 9 User Manual

Page 82

Advertising
background image

ILCE-9
4-692-676-11 (2)

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08

GB

82

Self-timer

Shoots an image using the self-timer after a designated number of
seconds have elapsed since the shutter button was pressed. Use the
5-second/10-second self-timer when you are going to be in the picture,
and use the 2-second self-timer to reduce camera-shake caused by
pressing the shutter button.

1

Select  (Self-timer) by turning the drive mode dial.

• Turn the drive mode dial while holding down the drive mode dial lock

release button.

2

MENU

 (Camera Settings 1)

[Self-timer Type]

[Self-timer (Single)]

desired mode.

The mode determines the number of seconds until a picture is taken
after the shutter button is pressed.

• The setting screen for [Self-timer Type] can be displayed by pressing

the Fn button.

 Self-timer (Single): 10 Sec

 Self-timer (Single): 5 Sec
 Self-timer (Single): 2 Sec

3

Adjust the focus and shoot the image.

The self-timer lamp flashes, a beep sounds, and a picture is taken after
the designated number of seconds have elapsed.

Hint

• Press the shutter button again to stop the count of the self-timer.

• Select a drive mode other than

 (Self-timer) by turning the drive mode dial

to cancel the self-timer.

• Set [Audio signals] to [Off] to mute the beep sound during self-timer counting.

• To use the self-timer in bracket mode, select

 (Bracket) by turning the drive

mode dial, then select MENU

 (Camera Settings 1)

 [Bracket Settings]

 [Selftimer during Brkt].

Advertising