Auto focus, Focus area – Sony Alpha 9 User Manual

Page 53

Advertising
background image

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08

ILCE-9
4-692-676-11 (2)

GB

53

Shoo

ting

Auto focus

Focus Area

Selects the focusing area. Use this function when it is difficult to focus
properly in the auto focus mode.

MENU

 (Camera Settings 1)

[Focus Area] desired

setting.

Wide: Focuses on a subject covering the whole range of the screen

automatically. When you press the shutter button halfway down in the
still image shooting mode, a green frame is displayed around the area
that is in focus.

Zone: Select a zone on the monitor on which to focus, and the product

will automatically select a focus area.

Center: Focuses automatically on a subject in the center of the image.

Use together with the focus-lock function to create the composition
you want.

Flexible Spot: Allows you to move the focusing frame to a desired

point on the screen and focus on an extremely small subject in a
narrow area.

Expand Flexible Spot: If the product cannot focus on a single

selected point, it uses focus points around the flexible spot as a
secondary priority area for focusing.

Lock-on AF: When the shutter button is pressed

and held halfway down, the product tracks the subject within the
selected autofocus area. This setting is available only when the
[Focus Mode] is set to [Continuous AF]. Point the cursor at [Lock-on AF]
on the [Focus Area] setting screen, and then adjust the desired area to
start tracking using the left/right sides of the control wheel. You can
also move the tracking start area to the desired point by designating
the area as a zone, flexible spot or expand flexible spot.

Advertising