Solid State Logic SSL 12 USB Audio Interface - Manual (Page 38)

Physical Specification
Height: 58.65mm
Length: 286.75mm
Depth: 154.94mm
Weight: 1.4kg
Troubleshooting, FAQs, Important Safety Notices
Frequently Asked Questions and additional support contacts can be found on the
Solid State Logic Support website.
General Safety
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that
produce heat.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Install in accordance with the manufacturer’s instructions.
Only use attachments/accessories recommended by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way,
such as liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Do NOT modify this unit, alterations may affect performance, safety and/or
international compliance standards.