Solid State Logic SSL 12 USB Audio Interface - Manual (Page 39)

Ensure that no strain is placed on any cables connected to this apparatus.
Ensure that all such cables are not placed where
they can be stepped on, pulled or tripped over.
SSL does not accept liability for damage caused by maintenance, repair or
modification by unauthorised personnel.
WARNING: To prevent possible hearing damage, do not listen at high volume levels
for long periods. As a guide to setting the volume level, check that you can still hear
your own voice, when speaking normally while listening with the headphones.
EU Compliance
SSL 12 Audio Interfaces are CE compliant. Note that any cables supplied with SSL
equipment may be fitted with ferrite rings at each end. This is to comply with the
current regulations and these ferrites should not be removed.
Electromagnetic Compatibility
EN 55032:2015, Environment: Class B, EN 55103-2:2009, Environments: E1 - E4.
Audio input and output ports are screened cable ports and any connections to them
should be made using braid-screened cable and metal connector shells in order to
provide a low impedance connection between the cable screen and the equipment.
RoHS notice
Solid State Logic complies with and this product conforms to European Union’s
Directive 2011/65/EU on Restrictions of Hazardous Substances (RoHS) as well as
the following sections of California law which refer to RoHS, namely sections
25214.10, 25214.10.2, and 58012, Health and Safety Code; Section 42475.2, Public
Resources Code.
Instructions for disposal of WEEE by users in the European
Union