Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 187)

Switching Roll Unit Modes
Before using the roll unit, follow these steps to select the mode you want to use.
Important
• After switching the roll unit function, you must use a separate computer to apply the roll unit settings to •
the printer driver. For details, see "Reflect Roll Unit Settings in the Printer Driver" (Windows) or " Reflect
Roll Unit Settings in the Printer Driver " (macOS).
• If you change the roll unit from a take-up device to a feed device, first cut the paper that has been taken •
up.
1. Tap paper settings display area on Home screen of touch screen. 1.
Important
• If the Home screen does not appear, tap the HOME button. •
2. Tap or area. 2.
3. Change function of roll unit. 3.
• Using as feed device •
1. Tap Roll unit use settings . 1.
2. Tap ON when message confirming roll unit's change to feed mode appears. 2.
187