Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 254)

Print settings
Select this setting item from Printer settings .
• Print head movable width setting •
Adjusts the print head movable width.
• Prioritize paper size •
This is a setting item for roll paper.
Select Enable to use the paper size setting as the basis for printing instead of other settings. The text or
images in the margin are not printed.
Select Disable to give priority to printing text or images.
Note
• The printed paper length is longer than the actual paper length. This is because the printed paper
includes the upper/lower margins specified by Roll Paper Safety Margin and Near End Margin in
the printer driver and excludes the paper margins.
• Magnification level for borderless •
Sets magnification level when performing borderless printing in the following print method.
Normally, the image is enlarged slightly and printed so that there is no border. If the border remains,
change this setting.
◦ Printing JPEG file ◦
◦ Printing using AirPrint ◦
◦ Printing PDF file ◦
◦ Printing data saved on the USB flash drive directly ◦
◦ Printing directly from FTP ◦
• PDF print settings •
Performs PDF print settings.
• JPEG print settings •
Performs JPEG print settings.
• HP-GL/2 print settings •
Performs various settings for HP-GL/2 print.
HP-GL/2 Settings
• Print from USB flash settings •
Performs settings for printing data saved on the USB flash drive.
• AirPrint print settings •
Performs AirPrint print settings when printing with AirPrint.
254