Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 201)

6. Hold printed paper between output guide and roll unit, then tap Yes . 6.
The roll is now cut.
Important
• When cutting the roll paper, always hold the printed paper. If cut without holding the printed paper, •
the paper may fall to the floor and become soiled.
7. While holding trailing edge of printed paper, press Take-up or Rewind button to wind 7.
printed paper.
Apply adhesive tape to the rewound paper to hold it in place, if necessary.
Important
• Be careful not to scratch the printed surface. •
8. Change Roll Holder Lock switch on roll unit to release side. 8.
201