Firmware update – Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual
Page 524
Firmware update
Important
• When you use this function, make sure the printer is connected to the Internet.
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
Using Operation Panel
1.
Tap
Printer settings
on home screen.
1.
2.
Tap
Firmware update
.
2.
Enter the password if it is enabled.
3.
Tap
Install update
.
3.
4.
Tap
Yes
.
4.
5.
Confirm displayed message and tap
Start update
.
5.
Using Remote UI
1.
Start up Remote UI.
1.
2.
Select
Firmware update
.
2.
3.
Select
Install update
.
3.
4.
Confirm displayed message and select
Update
.
4.
Note
• If the firmware update is not complete, check the following and take an appropriate action.
•
Check the network settings such as a wireless router.
If
Cannot connect to the server.
is displayed on the touch screen, select
OK
and try again
after a while.
524