Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual
Page 416
Enter the correct security key.
Make sure wireless
signal is strong.
• Make sure the printer is not placed too far away from the wireless router.
•
• Monitor signal status and move the printer and wireless router as necessary.
•
The number of con-
nected clients rea-
ches the upper limit.
• Wireless Direct does not allow more than 5 devices to be connected.
•
If you add a device to connect, disconnect a device you do not use before adding the
device.
The signal to noise
ratio (S/N ratio) is
low.
• There is a lot of noise from other devices.
•
Move the printer apart from other devices.
A link local address
is assigned.
• Perform printer setup again.
• The security key specified for the wireless router may not match that you entered.
•
The security key is case-sensitive.
Enter the correct security key.
The specified net-
work name (SSID) is
left default value.
The network name (SSID) is not specified.
Enter the network name (SSID) specified for the destination.
416