Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 156)

◦ RAW protocol
Enables/Disables RAW printing.
◦ LLMNR
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ Use Dedicated Port
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
Selecting ON allows you to use the dedicated port.
◦ Wi-Fi DRX setting
Selecting Enable allows you to activate discontinuous reception when using Wi-Fi.
◦ Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
◦ Reset SSL certificates
Initializes SSL certificate information.
◦ Reset LAN settings
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.
156