Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 81)

Note
• If the Home screen does not appear, press the HOME button.
2. Tap Paper settings .
3. Tap Advanced .
4. Tap Cutting mode .
5. Tap Eject cut .
6. Print the job.
When printing is finished, the printer will stop without cutting.
7. While holding the printed document from the bottom edge to prevent it from dropping, tap
Cut paper to cut the roll paper.
Manual (when using media that cannot be cut with the cutter blade)
Note
• Once the following step has been performed, the procedure can be started from step 8 the next time.
• Printing the second and subsequent times
• Printing after replacing with the same type of paper
1. Tap paper settings display area on Home screen of operation panel.
81